borgmatic/docs/how-to/add-preparation-and-cleanup-steps-to-backups.md

---

title: How to add preparation and cleanup steps to backups eleventyNavigation: key: 🧹 Add preparation and cleanup steps parent: How-to guides

order: 10

Preparation and cleanup hooks

If you find yourself performing preparation tasks before your backup runs or doing cleanup work afterwards, borgmatic command hooks may be of interest. These are custom shell commands you can configure borgmatic to execute at various points as it runs.

(But if you're looking to backup a database, it's probably easier to use the database backup feature instead.)

New in version 2.0.0 Command hooks are now configured via a list of commands: in your borgmatic configuration file. For example:

commands:
    - before: action
      when: [create]
      run:
          - echo "Before create!"
    - after: action
      when:
          - create
          - prune
      run:
          - echo "After create or prune!"
    - after: error
      run:
          - echo "Something went wrong!"

If you're coming from an older version of borgmatic, there is tooling to help you upgrade your configuration to this new command hook format.

Note that if a run: command contains a special YAML character such as a colon, you may need to quote the entire string (or use a multiline string) to avoid an error:

commands:
    - before: action
      when: [create]
      run:
          - "echo Backup: start"

By default, an after command hook runs even if an error occurs in the corresponding before hook or between those two hooks. This allows you to perform cleanup steps that correspond to before preparation commands—even when something goes wrong. You may notice that this is a departure from the way that the deprecated after_* hooks worked in borgmatic prior to version 2.0.0.

New in version 2.0.3 You can customize this behavior with the states option. For instance, here's an example of an after hook that only triggers on success and not on error:

commands:
    - after: action
      when: [create]
      states: [finish]
      run:
          - echo "After successful create!"

Each command in the commands: list has the following options:

• before or after: Name for the point in borgmatic's execution that the commands should be run before or after, one of:
  • action runs before each action for each repository. This replaces the deprecated before_create, after_prune, etc.
  • repository runs before or after all actions for each repository. This replaces the deprecated before_actions and after_actions.
  • configuration runs before or after all actions and repositories in the current configuration file.
  • everything runs before or after all configuration files. Errors here do not trigger error hooks or the fail state in monitoring hooks. This replaces the deprecated before_everything and after_everything.
  • error runs after an error occurs—and it's only available for after. This replaces the deprecated on_error hook.
• when: Only trigger the hook when borgmatic is run with particular actions (create, prune, etc.) listed here. Defaults to running for all actions.
• states: New in version 2.0.3 Only trigger the hook if borgmatic encounters one of the states (execution results) listed here. This state is evaluated only for the scope of the configured action, repository, etc., rather than for the entire borgmatic run. Only available for after hooks. Defaults to running the hook for all states. One or more of:
  • finish: No errors occurred.
  • fail: An error occurred.
• run: List of one or more shell commands or scripts to run when this command hook is triggered.

When command hooks run, they respect the working_directory option if it is configured, meaning that the hook commands are run in that directory.

New in version 2.0.4If the exact same everything command hook is present in multiple configuration files, borgmatic only runs it once.

Order of execution

Here's a way of visualizing how all of these command hooks slot into borgmatic's execution.

Let's say you've got a borgmatic configuration file with a configured repository. And suppose you configure several command hooks and then run borgmatic for the create and prune actions. Here's the order of execution:

• Run before: everything hooks (from all configuration files).
  • Run before: configuration hooks (from the first configuration file).
    • Run before: repository hooks (for the first repository).
      • Run before: action hooks for create.
      • Actually run the create action (e.g. borg create).
      • Run after: action hooks for create.
      • Run before: action hooks for prune.
      • Actually run the prune action (e.g. borg prune).
      • Run after: action hooks for prune.
    • Run after: repository hooks (for the first repository).
  • Run after: configuration hooks (from the first configuration file).
  • Run after: error hooks (if an error occurs).
• Run after: everything hooks (from all configuration files).

This same order of execution extends to multiple repositories and/or configuration files.

Based on the above, you can see the difference between, say, an after: action hook with states: [fail] and an after: error hook. The after: action hook runs immediately after the create action fails for a particular repository—so before any subsequent actions for that repository or other repositories even have a chance to run. Whereas the after: error hook doesn't run until all actions for—and repositories in—a configuration file have had a chance to execute.

Deprecated command hooks

Prior to version 2.0.0 The command hooks worked a little differently. In these older versions of borgmatic, you can specify before_backup hooks to perform preparation steps before running backups and specify after_backup hooks to perform cleanup steps afterwards. These deprecated command hooks still work in version 2.0.0+, although see below about a few semantic differences starting in that version.

Here's an example of these deprecated hooks:

before_backup:
    - mount /some/filesystem
after_backup:
    - umount /some/filesystem

If your command contains a special YAML character such as a colon, you may need to quote the entire string (or use a multiline string) to avoid an error:

before_backup:
    - "echo Backup: start"

There are additional hooks that run before/after other actions as well. For instance, before_prune runs before a prune action for a repository, while after_prune runs after it.

Prior to version 1.8.0 Put these options in the hooks: section of your configuration.

New in version 2.0.0 An after_* command hook runs even if an error occurs in the corresponding before_* hook or between those two hooks. This allows you to perform cleanup steps that correspond to before_* preparation commands—even when something goes wrong.

New in version 2.0.0 When command hooks run, they respect the working_directory option if it is configured, meaning that the hook commands are run in that directory.

New in version 1.7.0 The before_actions and after_actions hooks run before/after all the actions (like create, prune, etc.) for each repository. These hooks are a good place to run per-repository steps like mounting/unmounting a remote filesystem.

New in version 1.6.0 The before_backup and after_backup hooks each run once per repository in a configuration file. before_backup hooks runs right before the create action for a particular repository, and after_backup hooks run afterwards, but not if an error occurs in a previous hook or in the backups themselves. (Prior to borgmatic 1.6.0, these hooks instead ran once per configuration file rather than once per repository.)

You can also use before_everything and after_everything hooks to perform global setup or cleanup:

before_everything:
    - set-up-stuff-globally

after_everything:
    - clean-up-stuff-globally

Prior to version 1.8.0 Put these options in the hooks: section of your configuration.

before_everything hooks collected from all borgmatic configuration files run once before all configuration files (prior to all actions), but only if there is a create action. An error encountered during a before_everything hook causes borgmatic to exit without creating backups.

after_everything hooks run once after all configuration files and actions, but only if there is a create action. It runs even if an error occurs during a backup or a backup hook, but not if an error occurs during a before_everything hook.

on_error hooks run when an error occurs, but only if there is a create, prune, compact, or check action. For instance, borgmatic can run configurable shell commands to fire off custom error notifications or take other actions, so you can get alerted as soon as something goes wrong. Here's a not-so-useful example:

on_error:
    - echo "Error while creating a backup or running a backup hook."

Prior to version 1.8.0 Put this option in the hooks: section of your configuration.

The on_error hook supports interpolating particular runtime variables into the hook command. Here's an example that assumes you provide a separate shell script to handle the alerting:

on_error:
    - send-text-message.sh

borgmatic does not run on_error hooks if an error occurs within a before_everything or after_everything hook.

Variable interpolation

The command action hooks support interpolating particular runtime variables into the commands that are run. Here's are a couple examples that assume you provide separate shell scripts:

commands:
    - after: action
      when: [prune]
      run:
          - record-prune.sh {configuration_filename} {repository}
    - after: error
      when: [create]
      run:
          - send-text-message.sh {configuration_filename} {repository}

In this example, when the hook is triggered, borgmatic interpolates runtime values into each hook command: the borgmatic configuration filename and the paths of the current Borg repository.

Here's the full set of supported variables you can use here:

• configuration_filename: borgmatic configuration filename in which the hook was defined
• log_file New in version 1.7.12: path of the borgmatic log file, only set when the --log-file flag is used
• repository: path of the current repository as configured in the current borgmatic configuration file, if applicable to the current hook
• repository_label New in version 1.8.12: label of the current repository as configured in the current borgmatic configuration file, if applicable to the current hook
• error: the error message itself, only applies to error hooks
• output: output of the command that failed, only applies to error hooks (may be blank if an error occurred without running a command)

Not all command hooks support all variables. For instance, the everything and configuration hooks don't support repository variables because those hooks don't run in the context of a single repository. But the deprecated command hooks (before_backup, on_error, etc.) do generally support variable interpolation.

borgmatic automatically escapes these interpolated values to prevent shell injection attacks. One implication is that you shouldn't wrap the interpolated values in your own quotes, as that will interfere with the quoting performed by borgmatic and result in your command receiving incorrect arguments. For instance, this won't work:

commands:
    - after: error
      run:
          # Don't do this! It won't work, as the {error} value is already quoted.
          - send-text-message.sh "Uh oh: {error}"

Do this instead:

commands:
    - after: error
      run:
          - send-text-message.sh {error}

Note that you can also interpolate arbitrary environment variables.

Hook output

Any output produced by your hooks shows up both at the console and in syslog (when enabled). For more information, read about inspecting your backups.

Security

An important security note about hooks: borgmatic executes all hook commands with the user permissions of borgmatic itself. So to prevent potential shell injection or privilege escalation, do not forget to set secure permissions on borgmatic configuration files (chmod 0600) and scripts (chmod 0700) invoked by hooks.