borg/docs/usage.rst

.. include:: global.rst.inc
.. _detailed_usage:

Usage
=====

|project_name| consists of a number of commands. Each command accepts
a number of arguments and options. The following sections will describe each
command in detail.

Quiet by default
----------------

Like most UNIX commands |project_name| is quiet by default but the ``-v`` or
``--verbose`` option can be used to get the program to output more status
messages as it is processing.

Return codes
------------

|project_name| can exit with the following return codes (rc):

::

    0      no error, normal termination
    1      some error occurred (this can be a complete or a partial failure)
    128+N  killed by signal N (e.g. 137 == kill -9)


Note: we are aware that more distinct return codes might be useful, but it is
not clear yet which return codes should be used for which precise conditions.

See issue #61 for a discussion about that. Depending on the outcome of the
discussion there, return codes may change in future (the only thing rather sure
is that 0 will always mean some sort of success and "not 0" will always mean
some sort of warning / error / failure - but the definition of success might
change).

Environment Variables
---------------------

|project_name| uses some environment variables for automation:

General:
    BORG_REPO
        When set, use the value to give the default repository location. If a command needs an archive
        parameter, you can abbreviate as `::archive`. If a command needs a repository parameter, you
        can either leave it away or abbreviate as `::`, if a positional parameter is required.
    BORG_PASSPHRASE
        When set, use the value to answer the passphrase question for encrypted repositories.
    TMPDIR
        where temporary files are stored (might need a lot of temporary space for some operations)

Some "yes" sayers (if set, they automatically confirm that you really want to do X even if there is that warning):
    BORG_UNKNOWN_UNENCRYPTED_REPO_ACCESS_IS_OK
        For "Warning: Attempting to access a previously unknown unencrypted repository"
    BORG_RELOCATED_REPO_ACCESS_IS_OK
        For "Warning: The repository at location ... was previously located at ..."
    BORG_CHECK_I_KNOW_WHAT_I_AM_DOING
        For "Warning: 'check --repair' is an experimental feature that might result in data loss."

Directories:
    BORG_KEYS_DIR
        Default to '~/.borg/keys'. This directory contains keys for encrypted repositories.
    BORG_CACHE_DIR
        Default to '~/.cache/borg'. This directory contains the local cache and might need a lot
        of space for dealing with big repositories).

Building:
    BORG_OPENSSL_PREFIX
        Adds given OpenSSL header file directory to the default locations (setup.py).


Please note:

- be very careful when using the "yes" sayers, the warnings with prompt exist for your / your data's security/safety
- also be very careful when putting your passphrase into a script, make sure it has appropriate file permissions
  (e.g. mode 600, root:root).


Resource Usage
--------------

|project_name| might use a lot of resources depending on the size of the data set it is dealing with.

CPU:
    It won't go beyond 100% of 1 core as the code is currently single-threaded.
    Especially higher zlib and lzma compression levels use significant amounts
    of CPU cycles.

Memory (RAM):
    The chunks index and the files index are read into memory for performance
    reasons.
    Compression, esp. lzma compression with high levels might need substantial
    amounts of memory.

Temporary files:
    Reading data and metadata from a FUSE mounted repository will consume about
    the same space as the deduplicated chunks used to represent them in the
    repository.

Cache files:
    Contains the chunks index and files index (plus a compressed collection of
    single-archive chunk indexes).

Chunks index:
    Proportional to the amount of data chunks in your repo. Lots of small chunks
    in your repo imply a big chunks index. You may need to tweak the chunker
    params (see create options) if you have a lot of data and you want to keep
    the chunks index at some reasonable size.

Files index:
    Proportional to the amount of files in your last backup. Can be switched
    off (see create options), but next backup will be much slower if you do.

Network:
    If your repository is remote, all deduplicated (and optionally compressed/
    encrypted) data of course has to go over the connection (ssh: repo url).
    If you use a locally mounted network filesystem, additionally some copy
    operations used for transaction support also go over the connection. If
    you backup multiple sources to one target repository, additional traffic
    happens for cache resynchronization.

In case you are interested in more details, please read the internals documentation.


.. include:: usage/init.rst.inc

Examples
~~~~~~~~
::

    # Local repository
    $ borg init /mnt/backup

    # Remote repository (accesses a remote borg via ssh)
    $ borg init user@hostname:backup

    # Encrypted remote repository, store the key in the repo
    $ borg init --encryption=repokey user@hostname:backup

    # Encrypted remote repository, store the key your home dir
    $ borg init --encryption=keyfile user@hostname:backup

Important notes about encryption:

Use encryption! Repository encryption protects you e.g. against the case that
an attacker has access to your backup repository.

But be careful with the key / the passphrase:

``--encryption=passphrase`` is DEPRECATED and will be removed in next major release.
This mode has very fundamental, unfixable problems (like you can never change
your passphrase or the pbkdf2 iteration count for an existing repository, because
the encryption / decryption key is directly derived from the passphrase).

If you want "passphrase-only" security, just use the ``repokey`` mode. The key will
be stored inside the repository (in its "config" file). In above mentioned
attack scenario, the attacker will have the key (but not the passphrase).

If you want "passphrase and having-the-key" security, use the ``keyfile`` mode.
The key will be stored in your home directory (in ``.borg/keys``). In the attack
scenario, the attacker who has just access to your repo won't have the key (and
also not the passphrase).

Make a backup copy of the key file (``keyfile`` mode) or repo config file
(``repokey`` mode) and keep it at a safe place, so you still have the key in
case it gets corrupted or lost.
The backup that is encrypted with that key won't help you with that, of course.

Make sure you use a good passphrase. Not too short, not too simple. The real
encryption / decryption key is encrypted with / locked by your passphrase.
If an attacker gets your key, he can't unlock and use it without knowing the
passphrase. In ``repokey`` and ``keyfile`` modes, you can change your passphrase
for existing repos.


.. include:: usage/create.rst.inc

Examples
~~~~~~~~
::

    # Backup ~/Documents into an archive named "my-documents"
    $ borg create /mnt/backup::my-documents ~/Documents

    # Backup ~/Documents and ~/src but exclude pyc files
    $ borg create /mnt/backup::my-files   \
        ~/Documents                       \
        ~/src                             \
        --exclude '*.pyc'

    # Backup the root filesystem into an archive named "root-YYYY-MM-DD"
    NAME="root-`date +%Y-%m-%d`"
    $ borg create /mnt/backup::$NAME / --do-not-cross-mountpoints

    # Backup huge files with little chunk management overhead
    $ borg create --chunker-params 19,23,21,4095 /mnt/backup::VMs /srv/VMs

    # Backup a raw device (must not be active/in use/mounted at that time)
    $ dd if=/dev/sda bs=10M | borg create /mnt/backup::my-sda -

    # No compression (default)
    $ borg create /mnt/backup::repo ~

    # Super fast, low compression
    $ borg create --compression lz4 /mnt/backup::repo ~

    # Less fast, higher compression (N = 0..9)
    $ borg create --compression zlib,N /mnt/backup::repo ~

    # Even slower, even higher compression (N = 0..9)
    $ borg create --compression lzma,N /mnt/backup::repo ~

    # Backup some LV snapshots (you have to create the snapshots before this
    # and remove them afterwards). We also backup the output of lvdisplay so
    # we can see the LV sizes at restore time. See also "borg extract" examples.
    $ lvdisplay > lvdisplay.txt
    $ borg create --read-special /mnt/backup::repo lvdisplay.txt /dev/vg0/*-snapshot

.. include:: usage/extract.rst.inc

Examples
~~~~~~~~
::

    # Extract entire archive
    $ borg extract /mnt/backup::my-files

    # Extract entire archive and list files while processing
    $ borg extract -v /mnt/backup::my-files

    # Extract the "src" directory
    $ borg extract /mnt/backup::my-files home/USERNAME/src

    # Extract the "src" directory but exclude object files
    $ borg extract /mnt/backup::my-files home/USERNAME/src --exclude '*.o'

    # Restore LV snapshots (the target LVs /dev/vg0/* of correct size have
    # to be already available and will be overwritten by this command!)
    $ borg extract --stdout /mnt/backup::repo dev/vg0/root-snapshot > /dev/vg0/root
    $ borg extract --stdout /mnt/backup::repo dev/vg0/home-snapshot > /dev/vg0/home

Note: currently, extract always writes into the current working directory ("."),
      so make sure you ``cd`` to the right place before calling ``borg extract``.

.. include:: usage/check.rst.inc

.. include:: usage/delete.rst.inc

.. include:: usage/list.rst.inc

Examples
~~~~~~~~
::

    $ borg list /mnt/backup
    my-files            Thu Aug  1 23:33:22 2013
    my-documents        Thu Aug  1 23:35:43 2013
    root-2013-08-01     Thu Aug  1 23:43:55 2013
    root-2013-08-02     Fri Aug  2 15:18:17 2013
    ...

    $ borg list /mnt/backup::root-2013-08-02
    drwxr-xr-x root   root          0 Jun 05 12:06 .
    lrwxrwxrwx root   root          0 May 31 20:40 bin -> usr/bin
    drwxr-xr-x root   root          0 Aug 01 22:08 etc
    drwxr-xr-x root   root          0 Jul 15 22:07 etc/ImageMagick-6
    -rw-r--r-- root   root       1383 May 22 22:25 etc/ImageMagick-6/colors.xml
    ...


.. include:: usage/prune.rst.inc

Examples
~~~~~~~~
::

    # Keep 7 end of day and 4 additional end of week archives:
    $ borg prune /mnt/backup --keep-daily=7 --keep-weekly=4

    # Same as above but only apply to archive names starting with "foo":
    $ borg prune /mnt/backup --keep-daily=7 --keep-weekly=4 --prefix=foo

    # Keep 7 end of day, 4 additional end of week archives,
    # and an end of month archive for every month:
    $ borg prune /mnt/backup --keep-daily=7 --keep-weekly=4 --keep-monthly=-1

    # Keep all backups in the last 10 days, 4 additional end of week archives,
    # and an end of month archive for every month:
    $ borg prune /mnt/backup --keep-within=10d --keep-weekly=4 --keep-monthly=-1


.. include:: usage/info.rst.inc

Examples
~~~~~~~~
::

    $ borg info /mnt/backup::root-2013-08-02
    Name: root-2013-08-02
    Fingerprint: bc3902e2c79b6d25f5d769b335c5c49331e6537f324d8d3badcb9a0917536dbb
    Hostname: myhostname
    Username: root
    Time: Fri Aug  2 15:18:17 2013
    Command line: /usr/bin/borg create --stats /mnt/backup::root-2013-08-02 / --do-not-cross-mountpoints
    Number of files: 147429
    Original size: 5344169493 (4.98 GB)
    Compressed size: 1748189642 (1.63 GB)
    Unique data: 64805454 (61.80 MB)


.. include:: usage/mount.rst.inc

Examples
~~~~~~~~
::

    $ borg mount /mnt/backup::root-2013-08-02 /tmp/mymountpoint
    $ ls /tmp/mymountpoint
    bin  boot  etc  lib  lib64  mnt  opt  root  sbin  srv  usr  var
    $ fusermount -u /tmp/mymountpoint


.. include:: usage/change-passphrase.rst.inc

Examples
~~~~~~~~
::

    # Create a key file protected repository
    $ borg init --encryption=keyfile /mnt/backup
    Initializing repository at "/mnt/backup"
    Enter passphrase (empty for no passphrase):
    Enter same passphrase again: 
    Key file "/home/USER/.borg/keys/mnt_backup" created.
    Keep this file safe. Your data will be inaccessible without it.

    # Change key file passphrase
    $ borg change-passphrase /mnt/backup
    Enter passphrase for key file /home/USER/.borg/keys/mnt_backup:
    New passphrase: 
    Enter same passphrase again: 
    Key file "/home/USER/.borg/keys/mnt_backup" updated


.. include:: usage/serve.rst.inc

Examples
~~~~~~~~
::

    # Allow an SSH keypair to only run |project_name|, and only have access to /mnt/backup.
    # This will help to secure an automated remote backup system.
    $ cat ~/.ssh/authorized_keys
    command="borg serve --restrict-to-path /mnt/backup" ssh-rsa AAAAB3[...]