.. include:: ../global.rst.inc
.. highlight:: none

Backing up in pull mode
=======================

Assuming you have a pull backup system set up with borg, where a backup server
pulls the data from the target via SSHFS. In this mode, the backup client's file
system is mounted remotely on the backup server. Pull mode is even possible if
the SSH connection must be established by the client via a remote tunnel. Other
network file systems like NFS or SMB could be used as well, but SSHFS is very
simple to set up and probably the most secure one.

There are some restrictions caused by SSHFS. For example, unless you define UID
and GID mappings when mounting via ``sshfs``, owners and groups of the mounted
file system will probably change, and you may not have access to those files if
BorgBackup is not run with root privileges.

SSHFS is a FUSE file system and uses the SFTP protocol, so there may be also
other unsupported features that the actual implementations of ssfs, libfuse and
sftp on the backup server do not support, like file name encodings, ACLs, xattrs
or flags. So there is no guarantee that you are able to restore a system
completely in every aspect from such a backup.

.. warning::

    To mount the client's root file system you will need root access to the
    client. This contradicts to the usual threat model of BorgBackup, where
    clients don't need to trust the backup server (data is encrypted). In pull
    mode the server (when logged in as root) could cause unlimited damage to the
    client. Therefore, pull mode should be used only from servers you do fully
    trust!

Creating a backup
-----------------

Generally, in a pull backup situation there is no direct way for borg to know
the client's original UID:GID name mapping of files, because Borg would use
``/etc/passwd`` and ``/etc/group`` of the backup server to map the names. To
derive the right names, Borg needs to have access to the client's passwd and
group files and use them in the backup process.

The solution to this problem is chrooting into an sshfs mounted directory. In
this example the whole client root file system is mounted. We use the
stand-alone BorgBackup executable and copy it into the mounted file system to
make Borg available after entering chroot; this can be skipped if Borg is
already installed on the client.

::

    # Mount client root file system.
    mkdir /tmp/sshfs
    sshfs root@host:/ /tmp/sshfs
    # Mount BorgBackup repository inside it.
    mkdir /tmp/sshfs/borgrepo
    mount --bind /path/to/repo /tmp/sshfs/borgrepo
    # Make borg executable available.
    cp /usr/local/bin/borg /tmp/sshfs/usr/local/bin/borg
    # Mount important system directories and enter chroot.
    cd /tmp/sshfs
    for i in dev proc sys; do mount --bind /$i $i; done
    chroot /tmp/sshfs

Now we are on the backup system but inside a chroot with the client's root file
system. We have a copy of Borg binary in ``/usr/local/bin`` and the repository
in ``/borgrepo``. Borg will back up the client's user/group names, and we can
create the backup, retaining the original paths, excluding the repository:

::

    borg create --exclude /borgrepo --files-cache ctime,size /borgrepo::archive /

For the sake of simplicity only ``/borgrepo`` is excluded here. You may want to
set up an exclude file with additional files and folders to be excluded. Also
note that we have to modify Borg's file change detection behaviour – SSHFS
cannot guarantee stable inode numbers, so we have to supply the
``--files-cache`` option.

Finally, we need to exit chroot, unmount all the stuff and clean up:

::

    exit # exit chroot
    rm /tmp/sshfs/usr/local/bin/borg
    cd /tmp/sshfs
    for i in dev proc sys borgrepo; do umount ./$i; done
    rmdir borgrepo
    cd ~
    umount /tmp/sshfs
    rmdir /tmp/sshfs

Thanks to secuser on IRC for this how-to!

Restore methods
---------------

The counterpart of a pull backup is a push restore. Depending on the type of
restore – full restore or partial restore – there are different methods to make
sure the correct IDs are restored.

Partial restore
~~~~~~~~~~~~~~~

In case of a partial restore, using the archived UIDs/GIDs might lead to wrong
results if the name-to-ID mapping on the target system has changed compared to
backup time (might be the case e.g. for a fresh OS install).

The workaround again is chrooting into an sshfs mounted directory, so Borg is
able to map the user/group names of the backup files to the actual IDs on the
client. This example is similar to the backup above – only the Borg command is
different:

::

    # Mount client root file system.
    mkdir /tmp/sshfs
    sshfs root@host:/ /tmp/sshfs
    # Mount BorgBackup repository inside it.
    mkdir /tmp/sshfs/borgrepo
    mount --bind /path/to/repo /tmp/sshfs/borgrepo
    # Make borg executable available.
    cp /usr/local/bin/borg /tmp/sshfs/usr/local/bin/borg
    # Mount important system directories and enter chroot.
    cd /tmp/sshfs
    for i in dev proc sys; do mount --bind /$i $i; done
    chroot /tmp/sshfs

Now we can run

::

    borg extract /borgrepo::archive PATH

to partially restore whatever we like. Finally, do the clean-up:

::

    exit # exit chroot
    rm /tmp/sshfs/usr/local/bin/borg
    cd /tmp/sshfs
    for i in dev proc sys borgrepo; do umount ./$i; done
    rmdir borgrepo
    cd ~
    umount /tmp/sshfs
    rmdir /tmp/sshfs

Full restore
~~~~~~~~~~~~

When doing a full restore, we restore all files (including the ones containing
the ID-to-name mapping, ``/etc/passwd`` and ``/etc/group``). Everything will be
consistent automatically if we restore the numeric IDs stored in the archive. So
there is no need for a chroot environment; we just mount the client file system
and extract a backup, utilizing the ``--numeric-owner`` option:

::

    sshfs root@host:/ /mnt/sshfs
    cd /mnt/sshfs
    borg extract --numeric-owner /path/to/repo::archive
    cd ~
    umount /mnt/sshfs

Simple (lossy) full restore
~~~~~~~~~~~~~~~~~~~~~~~~~~~

Using ``borg export-tar`` it is possible to stream a backup to the client and
directly extract it without the need of mounting with SSHFS:

::

    borg export-tar /path/to/repo::archive - | ssh root@host 'tar -C / -x'

Note that in this scenario the tar format is the limiting factor – it cannot
restore all the advanced features that BorgBackup supports. See
:ref:`borg_export-tar` for limitations.
